保定市探测器厂

1、必须存放在干燥、无尘、无振动处。

1, it must be stored in dry, dust free and no vibration.

2、内部通道应保持清洁，无灰尘，若有污物，可用棉质物拭净。

2, the internal channel should be kept clean, no dust, if there is dirt, can be cleaned with cotton.

3、操作时，应避免通光面受到手指或油迹等污染，如有赃物或液体可用滤纸擦净。

3, operation, should be avoided through smooth by fingers or oil pollution, such as dirt or liquid can be used to clean the filter paper.

4、全面整理请勿在金属检测机上或者附近放置不适宜的产品(不宜放置金属物品及有电磁感染的产品)。

4. Do not place unsuitable products on or near the metal testing machine (not suitable for metal items and electromagnetic infection).

5、正确安装正确安装金属探测器，避免与其他机器(重量选别机)触碰前段和后端的输送带。底座要固定，让万向轮离开地面。

5, the correct installation of the correct installation of metal detectors, to avoid the other machines (weight selection machine) to touch the front and rear end of the conveyor belt. The base should be fixed, allowing the cardan wheel to leave the ground.