保定市探测器厂

金属探测器的工作原理是通入电流而在前端的探测部位形成一定范围的磁场，所以我们一定要保证在使用湿润后的毛巾擦洗探测器的时候千万不能讲探测器前端的连接部位受潮。

The working principle of the metal detector is to form a certain range of magnetic field in the detection part of the front end by entering the current. So we must make sure that when we use the wet towel to scrub the detector, we must not talk about the connection area of the detector front.

这一点一定要在进行金属类的探测器的日常保养的过程中注意，千万不能让探测器的连接部位或者是插头的地方受潮，否则很容易影响探 测器的正常的工作。

We must pay attention to the routine maintenance of metal detectors. We must not let the location of the detector or the place of the plug damp, otherwise it will easily affect the normal work of the detector.

当然除了不要让它受潮之外，探测器保存存放的温度也是有一定的要求。因为探测器的外壳一般是由塑料来制作的，所以不要让探测器长时间处于温度较低或者温度 较高的环境中，这样对于探测器的使用效果都是不好的。

Of course, in addition to not allowing it to be dampened, the detector's storage temperature is also required. Because the shell of the detector is usually made of plastic. So don't let the detector stay in a low temperature or high temperature environment for a long time, so the effect of detector is not good.